Radio Control Airplane Parts and Accessories. Lectron Pro ACDC-10A 1S-6S 10-Amp LiPo/LiFe/LiHV/NiMH Charger, Ducted Fan Motor...

Lectron Pro ACDC-10A 1S-6S 10-Amp LiPo/LiFe/LiHV/NiMH Charger This is the Lectron Pro ACDC-10A 1S-6S 10-Amp LiPo, LiFe, LiHV, and NiMH Charger. The name says it all: the ACDC-10A charger is AC and DC compatible right out of the box, and features a 10-Amp charge rate plus 80 watts of charging power to get your batteries ready to go faster than ever! The ACDC-10A charges up to 15 NiCad/NiMH cells or 6S Lithium batteries (including LiPo/LiFe/LiVH) and has a maximum charge rate of 10 amps. It also features a balancing circuit for lithium batteries and allows you to save the charge settings for up to 10 different battery models in the charger's integrated memory. Two motors, one with propeller and one with ducted fan. Battery Cell Spy 8 Voltage Checker The Cell Spy 8 is an easy-to-use device that can show you the condition of your battery packs while also serving as a battery balancer and servo tester. Simply plug in your battery and the Cell Spy 8 will display a variety of diagnostic information including total pack voltage, individual cell voltages, percentage of remaining battery capacity, degree of cell voltage imbalance and much more. A few quick button presses will also activate discharging or battery balancing modes. The Cell Spy 8 works with the following battery types: LiPo (2S-8S, can test 1S when an additional NiMH or NiCd battery is connected) Li-Ion (2S-8S) LiFe (2S-8S) Li-HV (2S-8S) NiCd (4S-8S) NiMH (4S-8S) To use the servo testing function, just connect your servo and a 4-cell NiMH or NiCad pack and you can toggle between manual, automatic and centering tests. Pickup category timeslot {C}